Complex Modulus characterization of an optimized binder with SCMs: proposition of an enhanced cement formulation to improve stiffness behaviorand durability of mortars and concretes

Nanosilica-based post-treatment of hardened cement-based materials: The underlying physics

Mechanical and thermal characterization of bio-sourced mortars made from agricultural and industrial by-products

Monitoring of drying kinetics evolution and hygrothermal properties of new earth-based materials using climatic chamber simulation

Durability Characterization of Concrete Using Seashell Co-products as Aggregate Replacement

Microstructure of Dry Mortars without Cement: Specific Surface Area, Pore Size and Volume Distribution Analysis

Earth-Based Building Incorporating Sargassum muticum Seaweed: Mechanical and Hygrothermal Performances

Investigation Properties of Pervious and Water-Retaining Recycled Concrete to Mitigate Urban Heat Island Phenomena

Microstructure and Durability Properties of Concretes Based on Oyster Shell Co-products

Earthen-based building: In-situ drying kinetics and shrinkage

Forecasting of hygrothermal behaviour of Direct Solar Floors using artificial neural networks

Effect of latent heat storage on thermal comfort and energy consumption in lightweight earth-based housings

Insight into the Behavior of Mortars Containing Glass Powder: An Artificial Neural Network Analysis Approach to Classify the Hydration Modes

Investigation of the mechanical and hygrothermal behavior of coffee ground wastes valorized as a building material: analysis of mix designs performance and sorption curve linearization effect

Influence of Pozzolans and Hemp Shives on the Properties of Non-Autoclaved Foamed Concrete

Artificial reefs built by 3D printing: Systematisation in the design, material selection and fabrication

Hydration characteristics of coconut fibre-reinforced mortars containing CSA and Portland cement

Comparative study of the thermal performance of an earth air heat exchanger and seasonal storage systems: Experimental validation of Artificial Neural Networks model

Diversity, structures assemblages and production of benthic communities on artificial reefs, a comparative case study in the English Channel

Primary production assessment on eco-engineering infrastructures: English Channel case study

Investigation of Mechanical and Thermal Performance of Concrete with Scallop Shells as Partial Cement Replacement: Alternative Binder and Life Cycle Assessment

Valorization of queen scallop shells in the preparation of metakaolin-based geopolymer mortars

On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment

Marine Biofilm effect on mortar surface layer

Fatigue behavior of concrete: A literature review on the main relevant parameters

Raman investigations and ab initio calculations of natural diamond-lonsdaleite originating from New Caledonia

Colonisation of artificial structures by primary producers: competition and photosynthetic behaviour

Improvement of cob thermal inertia by latent heat storage and its implication on energy consumption

Mechanical and hygrothermal performance of fly-ash and seashells concrete: In-situ experimental study and smart hygrothermal modeling for Normandy climate conditions

Effects of Wetting and Drying Cycles on Microstructure Change and Mechanical Properties of Coconut Fibre-Reinforced Mortar

Interaction between the diatom Cylindrotheca closterium and a siliceous mortar in a silica-limited environment

Occurrence of SiC and Diamond Polytypes, Chromite and Uranophane in Breccia from Nickel Laterites (New Caledonia): Combined Analyses

Impact of considering cork absorption during mixing process

Valorization of spent coffee ground as building material: Highlighting of sorption curve linearization on the coupled heat and moisture transfer

Water Sensitivity of Hemp-Foam Concrete

Construction Field Monitoring of a COB Prototype Building. In Construction Technologies and Architecture

Earth construction: Field variabilities and laboratory reproducibility

Experimental and numerical modelling of hygrothermal transfer: Application on building energy performance

Study of the energy performance of a combined system: Solar Thermal Collector - Storage tank - Floor heating, for the heating needs of a room in Maghreb climate

A review on physical and data-driven modeling of buildings hygrothermal behavior: Models, approaches and simulation tools

Valorisation of stranded Laminaria digitata seaweed as an insulating earth material

Artificial reefs in the North –East Atlantic area: Present situation, knowledge gaps and future perspectives

Mud-Based Construction Material: Promising Properties of French Gravel Wash Mud Mixed with Byproducts, Seashells and Fly Ash as a Binder

Thermal inertia and energy efficiency assessment of Direct Solar Floor system using a switching-linear model

Impact of phase change materials on lightened earth hygroscopic, thermal and mechanical properties

A preliminary investigation of a novel mortar based on alkali-activated seashell waste powder

Influence of infrastructure material composition and microtopography on marine biofilm growth and photobiology

Enhancement of the long-term mechanical performance of flax fiber-reinforced cementitious composites by using alternative binders

Effect of the sample form on the corrosion behavior of steels for concrete in 3% NaCl medium

Evaluation of the influence of accelerated carbonation on the microstructure and mechanical characteristics of coconut fibre-reinforced cementitious matrix

Marine artificial reefs, a meta-analysis of their design, objectives and effectiveness

The study of long-term durability and bio-colonization of concrete in marine environment

Sunspot analysis under varying conditions climate: distributed radiation on cooling floor and its effect on dynamic thermal behavior

Improving the thermal performance of earthen walls to satisfy current build‐ing regulations

Reactivity Effect of Calcium Carbonate on the Formation of Carboaluminate Phases in Ground Granulated Blast Furnace Slag Blended Cements

Urban Heat Island: Causes, Consequences, and Mitigation Measures with Emphasis on Reflective and Permeable Pavements

Multi-objective optimisation of a seasonal solar thermal energy storage system combined with an earth – air heat exchanger for net zero energy building

Hydration of flax fiber-reinforced cementitious composites: influence of fiber surface treatments

Aggregate size effects on the mechanical behaviour and on the gas permeability at damaged state of cement-based materials with and without slag

Which concrete substrate suits you? Ostrea edulis larval preferences and implications for shellfish restoration in Europe

Optimisation of 3D printed concrete for artificial reefs: Biofouling and mechanical analysis

Partial substitution of cement by the association of Ferronickel slags and Crepidula fornicata shells

Effect of geo-climatic conditions and pipe material on heating performance of earth-air heat exchangers

Optimization of non-autoclaved aerated insulating foam using bio-based materials, Construction and Building Materials

A data-driven methodology to predict thermal behaviour of residential buildings using piecewise linear models

Mechanical performance and corrosion resistance of reinforced concrete with marble waste, European Journal of Environmental and Civil Engineering

Insight into the partial replacement of cement by ferronickel slags from New Caledonia, European journal of environmental and civil engineering

Recycled duvets for building thermal insulation

Laboratory scale UV–visible degradation of acetamiprid in aqueous marketed mixtures - Structural elucidation of photoproducts and toxicological consequences

Reducing energy consumption of prefabricated building elements and lowering the environmental impact of concrete, Engineering Structures

Insight into the structural, elastic and electronic properties of a new orthorhombic 6O-SiC polytype, Scientific Reports (Nature)

Determination and Review of Physical and Mechanical Properties of Raw and Treated Coconut Fibers for Their Recycling in Construction Materials, Fibers | A data-driven methodology to predict thermal behaviour of residential buildings using piecewise linear

Building with earth: How we are working to revive an ancient, sustainable building technique

Valorisation of stranded Laminaria digitata seaweed as an insulating earth material

Physical Model of Hydrological Behavior of Permeable Pavements Using FlexPDE

Hygrothermal transfer modelling through a bio-based building material: Validation of a switching-linear model

Microstructural evolution and texture analysis of magnesium phosphate cement

Combined XRF, XRD, SEM-EDS, and Raman Analyses on Serpentinized Harzburgite (Nickel Laterite Mine, New Caledonia): Implications for Exploration and Geometallurgy

Effect of several parameters on non-autoclaved aerated concrete : use of recycling waste perlite

Effect of several parameters on non-autoclaved aerated concrete:use of recycling waste perlite

Mechanical performance of a dry mortar without cement, based on paper fly ash and blast furnace slag

Hygrothermal Behaviour of Cob Material

Influence of different surface treatments on the water absorption capacity of flax fibres : Rheology of fresh reinforced-mortars and mechanical properties in the hardened state

Influence of salt-forming anions on the geotechnical properties of a soil stabilised with hydraulic binders: effect of cation type

Trace and major elements’ stabilisation in soils treated with hydraulic binders

Quantifying Benefits of Permeable Pavement on Surface Runoff, an Agent-Based-Model with NetLogo

Quantifying Benefits of Permeable Pavement on Surface Runoff, an Agent-Based-Model with NetLogo

Theory of the photothermally generated Seebeck voltage in harmonic regime

Characterization of ready-mixed concrete plants sludge and incorporation into mortars: origin of pollutants, environmental characterization and impacts on mortars characteristics

Beneficial reuse of Brest-Harbor (France)-dredged sediment as alternative material in road building: laboratory investigations

Dependence of the properties of cementitious composites on the nature of the hydraulic binder coating the reinforcing flax fibers

Multi-physical properties of a structural concrete incorporating short flax fibers

Durability of pervious concrete using crushed seashells

A bibliography on the analytical model of the mechanical behaviour in uniaxial tension of fibre concrete: Application to concrete reinforced with fibres and powders from recycling of thermoset composite materials

Implementation and experimental monitoring of a subgrade road layer based on treated marine sediments

Trace element mobility in a polluted marine sediment after stabilisation with hydraulic binders

Stabilization of a silty soil: Effects of disruptive salts

Utilization of sludge from ready-mixed concrete plants as a substitute for limestone fillers

Properties of ordinary concretes incorporating crushed queen scallop shells

Colonisation et détérioration des bétons incorporant des coquilles pour récifs artificiels

Role of magnesium-stabilized amorphous calcium carbonate in mitigating the extent of carbonation in alkali-activated slag

Influence of sulfate and chloride ions on the geotechnical and microstructural properties of soils treated with hydraulic binders : individual and coupling effects

Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite

A modified method for the design of pervious concrete mix

Influence of anions on the geotechnical properties of soils treated with hydraulic bindres: Individual and coupling effects

Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders

Optimizing the formulation of flax fiber-reinforced cement composites

Experimental and numerical study of the structural and cracking behavior of an overlaid slab panel under cyclic flexural loading

Road material’s design based on marine dredging sediment and sand, treated with hydraulic road binders

Valorization of seashell by-products in pervious concrete pavers

Composition of self-compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard

Influence of chloride and sulfate ions on the geotechnical properties of soils treated with hydraulic binders